Mapping Instructions – T Spec

A guide to mapping a T spec handset.

Handset mapping instructions – T spec electronics

PLEASE ENSURE ROLLERS ARE OFF THE TYRES BEFORE PROCEEDING

To confirm that you have T Spec electronics, please check the serial number on the top of your electronics box, this will begin with the letter ‘T’

1) Remove lid by unscrewing the four screws (see picture)

2) Switch on the electronics with the Red Isolator Key

3) Switch on the handset by pressing both red buttons

4) Push the remapping button on the electronics board and release (see picture), the red LED will now flash

5) Press any of the movement buttons on the handset

6) The handset will now be mapped into the electronics