/ Published in Model 3 Support, Model 4 Support, Model 6 Support, Model 7 Support, Previous Generation Support, Support

Mapping Instructions – E Spec

A guide to mapping an E spec handset

Handset mapping instructions – E spec electronics

PLEASE ENSURE ROLLERS ARE OFF THE TYRES BEFORE PROCEEDING

To confirm that you have E Spec electronics, please check the serial number on the top of your electronics box, this will begin with the letter ‘E’

1) Remove lid by unscrewing the four screws (see picture)

2) Switch on the electronics with the Red Isolator Key

3) Switch on the handset by pressing both red buttons

4) Press and keep depressed the remapping button (as indicated below), the red light on the electronics box will flash. Press & hold down any movement button on the handset.

5) Release the remapping button, keeping the movement button press down

6) The handset will now be mapped into the electronics