Handset Tuning Instructions – CDFMD Spec

 A guide to tuning in a new handset FM/CDFM type

HANDSET MAPPING INSTRUCTIONS – CDFMD ELECTRONICS

PLEASE ENSURE ROLLERS ARE OFF THE TYRES BEFORE PROCEEDING

1) Switch on the mover electronics with the red isolator key, the green light on the electronics will illuminate.

2) Insert a non metallic pin (cocktail stick or aerial lead) into the hole marked with a little aerial symbol (picture shown)

3) Press the stick down and release, the red and green lights will flash (alternating)

4) Switch the handset on by pressing both green buttons and immediately release.

5) The handset will complete its start-up procedure, the green light on the electronics box will then turn solid green.

The handset will now be mapped into the electronics.